AR68.10-P-1000GH Remove/Install Instrument Panel

AR68.10-P-1000GH Remove/Install Instrument Panel







Remove/Install
1 Remove instrument panel bottom section (1()
2 Remove A-pillar trim on left and right
3 Remove upper section of air outlet panel (1)
- Long wedge: See Special Tools below.

4 Unscrew screws (3) from upper side of instrument panel
5 Remove instrument cluster (A1 remove
6.1 Disconnect sun sensor connector

NOTE: Only as of 01.09.01: Connector is located behind instrument cluster

7.1 Remove Parktronic display

NOTE: Only with Parktronic system (PTS), Code 220a.

8.1 Disconnect connector from actuator motor for air distribution flap

NOTE: Only as of 01.09.01: Connector is located at center air outlet nozzle on driver's side.

9.1 Disconnect connector from temperature sensor

NOTE: Only as of 01.09.01: Connector is located on right side of center air outlet nozzle.

10 Remove screws (9) from center of instrument panel
11 Remove screws (4) from sides of instrument panel
12 Remove instrument panel (2)

CAUTION: Danger of damaging instrument panel when removing and installing

13 Install in the reverse order

Special Tools

Long Wedge P/N # 115 589 03 59 00: