General
Data, Test Values:
Designation
- Engine 617.951
Electromagnetic shutoff clutch 12 V
- Delco 4.9 inches
Power input at 13.5V
- cold 3.9 amps
- warm 3.4 amps
Tightening Torque:
Screws (8) pulley-clutch body
- 11 Nm (1.1 kpm)
Screw M 10 x 30 pipe line to refrigerant compressor
- 50±3 Nm (5±3 kpm)
Nut (1) on drive shaft
- 13 Nm (1.3 kpm)
Screws (5 and 6) M 12 refrigerant compressor to carrier
- 60+10 Nm (6+1 kpm)
Hose line (14) from evaporator to pipe line 7/8"
- 29-37 Nm (2.9-3.7 kpm)
Hose line (15) from pipe line to condenser 3/4"
- 24-28 Nm (2.4-2.8 kpm)
Special Tools:
Holding device for refrigerant compressor
- 116 589 14 31 00
Holding wrench for clutch
- 116 589 04 40 00
Remover for clutch plate Model number 350
- 000 589 07 35 00
Installer with spacer for spring plate Model number 350
- 000 589 49 43 00
Assembly tool Model number 627
- 201 589 05 63 00
Guide member
- 116 589 05 63 00
Two-claw puller
- 000 589 88 33 00
Knock-out mandrel
- 115 589 02 35 02
Pressure test plate for refrigerant compressor
- 109 589 00 25 00
Conventional Tools:
Socket 14 mm, 3/8" square
- e.g. made by Hazet, 5030 Remscheid
Slip gauge (set)
- e.g. made by Hazet, 5630 Remscheid order no. 2147
Langbeck pliers 72 A (internal lock)
- e.g. made by Hazet, 5630 Remscheid order no. 1846 a-1
Pliers for locking ring J 2 (external lock)
- e.g. made by Hazet, 5630 Remscheid order no. 1846 c-2
Self-Made Tool:
Remover for 0-ring