Restraints - Repair And Diag. Of Airbag Wiring Harnesses

Date: January 18, 2012

Order No: S-B-91.60/195a

Supercedes: S-B-91.60/195, January 6, 2012

Group: 91

Revision a: Parts information removed. Reference EPC-net for relevant parts.

SUBJECT: MY-All, Models All

Repair and Diagnosis of Airbag Wiring Harness

When a driver airbag, front-passenger airbag, sidebag or windowbag or an emergency tensioning retractor is triggered, the coupling melts from the gas generator heat and becomes unusable. Up until now, repair on airbag wiring harnesses was not permitted due to safety reasons and had to be partly or completely replaced depending on type. As always follow most current part numbers and corresponding information in EPC before ordering.

NOTE:
The part numbers for the solder connector are available in the EPC under the DG (design group) ...\54\019. The "Repairing wiring harness using solder connectors" document is to be observed.

Follow WIS AR54.18-P-0600A Repair supplemental restraint system (SRS) squib wiring harness for Models:

Model 124, 126, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 246, 251, 414, 461, 463.

Follow WIS AR54.18-P-0600SLR Repair supplemental restraint system (SRS) squib wiring harness for Model: 199.