Paint - Warranty and Updated Supplier Information
Date: December 1997Order No.: S-SI-MBNA-98/13C
Supersedes: S-SI-MBNA-98/13B, June 1997
Group: 98
Revision:
Address, telephone number and additional information for BASF Corporation (Glasurit) updated.
All refinishing products updated.
SUBJECT: MBNA APPROVED REFINISHING PRODUCTS
As outlined in MB-Net Message # 96 (March 3,1997), Glasurit (BASF), Herberts Standox (American Standox), Sikkens (Azko) and Spies Hecker paint products are approved for refinishing.
Specific refinishing products from Glasurit, Herberts Standox, Sikkens and Spies Hecker are listed on the following pages.
General information can be obtained by contacting the supplier directly at the corporate headquarters listed below or by contacting your local distributor:
American Standox, Inc. (Herberts Standox) Akzo Coatings, Inc. (Sikkens)
47802 West Anchor Court 5555 Spalding Drive
Plymouth, MI 48170 Norcross, GA 30092
Tel. (313) 416-2145 Tel. (404) 441-6975
BASF Corporation (Glasurit) Spies Hecker, Inc.
26701 Telegraph 55 Sea Lane
Southfield, MI 48034 Farmington, NY 11735
Tel. (248)304-5200 (516)777-7100
MBNA recommends that only approved paint refinishing products and procedures be used on any Mercedes-Benz passenger car.
Do not submit warranty claims to MBNA for all repairs on refinished areas.
MBNA approved Herberts Standox refinishing products
MBNA approved Sikkens refinishing products
MBNA approved Glasurit refinishing products
MBNA approved Spies Hecker refinishing products