Depth of Torque Convertor Into Transmission Housing

PROCEDURE
1. Install torque convertor into transmission housing, aligning primary pump drive lugs into torque convertor flange slots.

Fig. 1:

2. Position transmission in vertical position with torque convertor at top (Figure 1).
3. Using depth gauge. measure dimension A from torque convertor mounting points to transmission housing parting surface.

Torque Convertor Installation Specifications:

4. To verify correct installation depth, compare measurement to chart listed below.

Failure to ensure that the torque convertor is correctly seated in the transmission housing will cause destruction of the torque convertor and primary pump.