Work Instructions: Overview
Group: 82Number: 361A
Date: July 1997
(supersedes W.I. 361, January 1997)
Revision: Updated to include M.Y. 1998
SUBJECT:
MODELS 129 AND 140
AS OF MODEL YEAR 1997
INSTALLATION OF CELLULAR TELEPHONE (CTEL) SYSTEM
Installing In-dash controller (IDC)
1. Unpack contents of Installation kit and compare to part's list at end of Work instructions. Read through entire procedure to familiarize yourself with sequence of instructions and parts. Remove Operating Guide from kit and place in Owner's Literature portfolio.
2. Disconnect and cover negative battery terminal.
3. Remove two screws securing false back to eyeglass compartment. Remove false back to expose two 12-pole connectors and one microphone connector (Figure 1). Remove cables from false back. False back and original mounting screws may be discarded.
4. Install IDC mounting bracket. Position mounting bracket (so that mounting holes align with two false back mounting holes. Secure bracket with four M4x10 mm self tapping screws (the two additional holes have pre-punched bosses).
5. Connect two 12-pole connectors to in-dash controller. Connect microphone connector to connection on top center of controller (Figure 2).
6. Secure left cable and microphone cable to clips on back of IDC. Slide in-dash controller into bracket and snap into place (Figure 3) - DO NOT PRESS ON THE LCD DISPLAY.
Parts Information
Recommended Labor Time
Description Time Models
Portable cellular telephone See latest Warranty 129, 140
installation Time Guide Publication