F. GPS Antenna - Model 210

1. Place antenna on Ground Plane in the center of the dots. The front of the antenna faces the single dot. See figure 11.

2. Place antenna ground plane (metal sheet 65 x 65 mm) 250 mm (10 in.) right of the edge of the 3rd brake light close to the rear edge of the hat shelf. Place ground plane with single dot to the right (Figure 11).

3. Run cable between window and hat shelf down to trunk.

4. Secure GPS antenna ground plane on package shelf with the adhesive strip on the back of the ground plane.

5. Tie down any GPS cable as necessary.

Note:
DO NOT tightly roll and/or kink any excess wire, this will interfere with satellite reception. Secure any excess wire loosely, making sure there are no kinks.