Preparation For Test

WARNING: Keep clear of the soft top linkage, upper part of the windshield and soft top compartment during soft top locking or unlocking operations (risk of personal injury).

CAUTION: Before beginning the test, check the oil level in the hydraulic unit reservoir and top up if needed.

Special Tools:

Conventional Tools, Test Equipment
Graduated beaker (0.5 liter, 10 ml graduations).

Brief description:
In order to make an accurate visual inspection for oil loss from the hydraulic system the windscreen or other personal belongings should be removed from the vehicle.

The hydraulic circuits and components for each soft top operation can be tested separately.

The soft top can be placed in all required positions either by the power soft top switch or (it needed with ignition: OFF) by hand.

All of the locks can be locked or unlocked with the soft top wrench.