Operation

Unlocking the central locking and Interior central locking
Deactivation of ATA
Aim transmitter window (a) on remote control at receiver on vehicle at distance of up to approx. 6 m. Momentarily press the button (b), the green signal lamp flashes. The green signal lamp goes out after approx. 3 seconds.

Locking the central locking and the Interior central locking
As with unlocking, point the transmitter window (a) at the receiver. Momentarily press button (b), red signal lamp flashes. As soon as all commands have been carried out, the red signal lamp goes out after about 3 seconds. If a command was not able to be carried out, e.g. because a door or the trunk lid is not completely closed, the lamp flashes again for up to about 10 seconds (for about 3 seconds on vehicles as of 12/93). After closing the door or the trunk lid correctly the central locking must first be unlocked and then locked again.

Closing side windows with infrared remote control
When locking, hold down the button (b) on the remote control, after about 1 second the windows which may have been left open begin to close. The closing process is interrupted, if the button on the remote control is released or the infrared beam between the remote control and the receiver is interrupted.