Checking Position Element Travel

References (BE), Test and adjustment data, exterior lights, Part 1 of 4






References (BE), Test and adjustment data, exterior lights, Part 2 of 4






References (BE), Test and adjustment data, exterior lights, Part 3 of 4






References (BE), Test and adjustment data, exterior lights, Part 4 of 4







1 Remove positioning element.
2 Attach vacuum line to positioning element.
3 Start engine and move headlamp range adjuster from position 0 to position 3.
4 Measure piston travel (a) on positioning element. If the specified values are not achieved, replace positioning element.