Adjust Vehicle Level With Springs or Spring Mount Replacement

Changing the height "a" of the rubber mount changes the vehicle level by approx 9 mm. (ca. 1.3°)

Four (front axle) or three (rear axle) rubber mounts are available for this vehicle
- 1 lug (n) = Height of rubber mount "a" of 8 mm
- 2 lugs (n) = Height of rubber mount "a" of 13 mm
- 3 lugs (n) = Height of rubber mount "a" of 18 mm
- 4 lugs (n) = Height of rubber mount "a" of 23 mm (front axle only)

If the level cannot be adjusted with the rubber mounts, the assignment between the spring rubber mounts and vehicle model must be determined once more, refer to the parts supplier.

NOTE:
^ In the event of complaints about the level, always replace springs in pairs.
^ Difference in level between the left and right side of the vehicle max. 9 mm.
^ Check and correct headlamp setting after changing the springs or spring rubber mounts.