AR27.19-P-0212A Remove/Install Control Solenoid Valves of Electric Controller Unit

AR27.19-P-0212A Remove/Install Control Solenoid Valves of Electric Controller Unit
TRANSMISSION 722.9





Electrohydraulic controller unit, model 221

1 Screw
2 Leaf spring
6 Magnet
6a Shift valve
7 Shift plate
Y3/8 Electric control unit (VGS)
Y3/8n3 Output speed sensor (VGS)
Y3/8n4 Fully integrated transmission control (VGS) control unit
Y3/8y1 Working pressure control solenoid valve (VGS)
Y3/8y2 Clutch control solenoid valve K1 (VGS)
Y3/8y3 Clutch control solenoid valve K2 (VGS)
Y3/8y4 Clutch control solenoid valve K3 (VGS)
Y3/8y5 Brake control solenoid valve B1 (VGS)
Y3/8y6 Brake control solenoid valve B2 (VGS)
Y3/8y7 Brake control solenoid valve B3 (VGS)
Y3/8y8 Torque converter lockup clutch control solenoid valve (VGS)





A If the control solenoid valve looks like this after cleaning, it needs to be replaced
B Clean control solenoid valve; if it looks like this after cleaning, it can be installed again
C Control solenoid valve OK, can be installed again