Test 2: Test Voltage Supply of Component B37 (Accelerator Pedal Sensor)

Test voltage supply of component B37 (Accelerator pedal sensor)

Test prerequisite
- The actual value is not o.k

Test sequence
- Switch off ignition
- Connect socket box
- (4.36) 121<-->114 (4.29)
- Switch on ignition

Specified value
- Voltage [4.75...5.25] V

Question: Is the measured value okay?

No
- The measured value is not o.k.
Possible cause and remedy
- Cable for voltage supply
**End of test**

Yes
- The measured value is o.k.
Further possible causes of fault
- Signal wire
- B37 (Accelerator pedal sensor)
**End of test**