AR82.62-P-7720I Remove/Install Loudspeaker Amplifier Control Module

AR82.62-P-7720I Remove/Install Loudspeaker Amplifier Control Module
- with CODE (810) Sound system

Shown On Model 220:

1 Connect quiescent current retention unit
2 Disconnect ground cable of battery
3 Remove paneling in trunk

NOTE: Floor covering, rear end center assembly paneling and side paneling on left-hand side.

4 Unscrew nuts (2) and bolts (1), remove mounting bracket upwards
5 Disconnect couplings

CAUTION: Do not bend D2B wires.

NOTE: If the sound amplifier (A2/13) is removed for a longer period of time, an adapter must be installed to close off the D2B ring.

6 Detach sound amplifier (A2/13) from mounting bracket.
7 Install in the reverse order.