D4 Shift Isolating Mechanism

LOCATION
- The D-4 switch isolating mechanism is integrated in the floor selector.

TASK
- To disconnect shift rod to the transmission from the floor selector.

FUNCTION
- By moving the selector lever laterally from "D" to "4" the shift shaft (66) is moved axially to the left and the cylindrical pin (68c) is also moved out of the intermediate lever (68a).

- At the same time the locking lever (68b) is pressed into the recess of the intermediate lever (68a). The locking lever (68b) locks the intermediate lever (68a), thus locating the Shift red in selector lever position "D". The cylindrical pin (68d) locates the locking lever (68b) on the shift shaft (66) and projects into a recess in the guide plate. This recess only permits a transverse movement of the shift shaft (66) in selector lever position "D".

Also Refer To:
- Location Of Floor Selector Components. Automatic Transmission, Location of Floor Selector Components