AZ54.65-P-0001-04MS Installing Control Module

AZ54.65-P-0001-04MS Installing Control Module
- 203.2## 1#






1 Carefully loosen insulation from sheet metal above left wheelhouse.
2 Use ultrasonic PTS control module (62) as template and transfer holes (see arrow in figure section) to left side wall of trunk (see arrows).
Install control module with plug locations downward.

3 Drill holes with 5 mm dia. bit (see arrows).






4 Insert connector for ultrasonic back-up assist wiring harness (1) into plug location for ultrasonic PTS control module (62).
Plug locations are coded and cannot be mixed up.






5 Install one sheet metal clip each on the ultrasonic PTS control module (62) (see single figure).
6 Screw ultrasonic PTS control module (62) with 4.2x22 mm sheet metal screw behind sheet metal part (see arrows).
Install control module with plug locations downward.

7 Glue insulation back on.