AR33.30-P-0625-02A Replace Deep-Groove Ball Bearing In Intermediate Shaft

AR33.30-P-0625-02A Replace deep-groove ball bearing in intermediate shaft

Special Tools:

Commercially Available Tools:

Removing

Component Identification:

1 Take out circlip (35a) for grooved ball bearing (35) using pliers

Component Identification:

2 Detach grooved ball bearing (35) using puller (035).

Install

Component Identification:

3 Check circlip (35) and replace if necessary.

Ensure correct seat in groove.

4 Press in grooved ball bearing (35) using press.

For this purpose the grooved ball inner race must be underlaid with a shim.

Component Identification:

5 Insert circlip (35a) for grooved ball bearing (35) using pliers.

Ensure correct seat in groove.