AR33.20-P-0315-01I Pressing Out and Pulling In Front Axle Shaft Flange
AR33.20-P-0315-01I Pressing out and pulling in front axle shaft flange
Special Tools:
Press out
Component Identification:
1 Place steering knuckle under press.
2 Press the front axle shaft flange (9) out of the steering knuckle using the thrust piece (09c) and extraction and insertion tool
Inserting
Component Identification:
3 Draw the front axle shaft flange (9) into the double-row angular ball bearing (9n) using the extraction and insertion tool.
Ensure that when drawing in the pressure plate (05c) makes proper contact with the double-row angular ball bearing.