Test 3: Check Actual Value Y62Y1 (Fuel Injector Cylinder 1)

Check actual value Y62y1 (Fuel injector cylinder 1)

Test sequence
- Run engine.

Note: The actual value indicated (Injection time) represents the internal computed quantity in control module ME motor electronics.This means that the actual value is displayed irrespective of the function of the injectors.

Status of the relevant actual values:
- Temperature of coolant: Communication with ECU required
- Injection time: Communication with ECU required

Specified values
- The value is [5 ...12] ms at a coolant temperature of approx. 20°C and when engine is started.
- The value is [1.4 ... 3] ms at a coolant temperature of approx. 80°C and when engine is idling.
- The value is [7...22] ms at a coolant temperature of approx. 80°C and when the throttle is blipped.

Question: Are the actual values o.k.?