P1926

The stop lamp feedback transmitted by control unit N73 (EIS [EZS] control unit) over the CAN bus is not available.
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module N15/5 (Electronic selector lever module control unit) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N73 (EIS [EZS] control unit)
Possible measures

- Read out fault memory of control unit N73 (EIS [EZS] control unit).
- Process displayed fault codes in control module N73 (EIS [EZS] control unit).
End of test