Test 2B: Test Current Consumption of Component Y58/1 (Purge Control Valve)

Test current consumption of component Y58/1 (Purge control valve)

Test prerequisite
- Actuation is not okay.

Test sequence
- Switch off ignition.
- Connect socket box.
- (5.5) 5<-->90 (4.5)
- Switch on ignition.

Specified value
- Amperage [0.3...0.5] A

Question: Is the measured value okay?

No
- The measured value is not o.k.
Possible cause and remedy
- Y58/1 (Purge control valve)

Yes
- The measured value is o.k.
Further possible causes of fault
- Perform mechanical inspection of component Y58/1 (Purge control valve)