EP2011

The coding of the control unit N15/3 (ETC [EGS] control unit) is impermissible.


Possible cause:

- N15/3 (ETC [EGS] control unit)
Affected functions:

- Engine diagnosis
- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action for non-coded control unit N15/3 (ETC [EGS] control unit)

1. Remedial action for non-coded control unit N15/3 (ETC [EGS] control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module N15/3 (ETC [EGS] control unit) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N15/5 (Electronic selector lever module control unit)
Possible measures

- Read out fault memory of control unit N15/5 (Electronic selector lever module control unit).
- Process displayed fault codes in control module N15/5 (Electronic selector lever module control unit).
End of test