GF80.45-P-2010QA Convenience Closing Via Keyless Go, Function

GF80.45-P-2010QA Convenience Closing Via Keyless Go, Function
- with CODE (889) Keyless Go


All four side windows can be closed with this function However, the soft top cannot be actuated at the same time Opening the side window via keyless go is not possible

Function requirements
^ Circuit 15 OFF
^ Doors closed
^ Vehicle locked

The convenience closing via keyless go is also performed on non-normalized windows

Function
The windows can be closed when the lock buttons on the left door handle switch (S17/19) or right door handle switch (S17/21) are pressed and held down. Closing the side windows corresponds to a manual closing operation. The locking request is relayed to the EIS control module (N73) by the
^ left door handle switch (S17/19) via left door keyless go control module (N69/8) or by the
^ right door handle switch (S17/21) via right door keyless go control module (N69/9)

which serves as gateway between the keyless go data line and CAN class B bus The information is relayed to the left door control module (N69/1), to the right door control module (N69/2) and to the soft top actuation control module (N52) by means of CAN class B bus.
The left front power window motor (M10/3) is actuated by the left door control module (N69/1), the right front power window motor (M10/4) by the right door control module (N69/2)
The left rear power window motors (M10/5) and right (M10/6) are actuated directly by the soft top actuation control module (N52)

Emergency opening function
if the lock button on the left door handle switch (S17/19) or right door handle switch (S17/21) is released and actuated again while the side windows are closing via keyless go, the side windows are actuated in the opening direction for 2 s