AR22.10-P-4340PV Remove/Install Right Engine Support

Remove/install Right Engine Support






DANGER:
- Risk of death, Death may result if vehicle slips or topples from the lifting platform.
- Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

1 Remove engine mounts
2 Dismount right engine support (2) from crankcase

NOTE: For this step, unscrew bolts (1)

CAUTION: Installation: Bolts (1) must be replaced, because the connection can loosen or the screws can tear off if reused.

3 Remove right engine support (2)

NOTE: Installation: Ensure that the electrical lines are not pinched.

4 Install in the reverse order