AR03.30-P-5000B Remove/Install Retaining Lock For Crankshaft/Ring Gear

Remove/install retaining lock for crankshaft/ring gear

Component Identification:

Removal, Installation, Steps 1 - 3:

References, Special Tools:

Component Identification, Part 1:

NOTE: The end cover (2) on engine 602.983 is bolted on.

Component Identification, Part 2:

Component Identification, Part 3:

Work Instructions, Steps 3 - 6:

References (BA), Oil Pan, Part 1:

References (BA), Oil Pan, Part 2:

References (BA), Oil Pan, Part 3:

References, Special Tools: