GF88.79-P-2004TX Store Outside Mirror Position, Function

GF88.79-P-2004TX Store Outside Mirror Position, Function
- with CODE (275) Memory package (driver seat, steering column, mirrors)

Component Identification:

Function requirements
^ Circuit 15R On or circuit 15 ON
^ No overvoltage or undervoltage

Function
Per transmitter key (A8/1), three positions of the left and right outside mirror can be stored manually and one position automatically with the memory function.
For storing a position, the left front seat adjustment switch group has switches for memory location 1, 2, 3 as well as the memory switch required to start the storage procedure.The signal for storing the position is transmitted by the left front door control unit via CAN-B bus and is read in by the driver-side front seat adjustment control unit with memory.
Before storing move left outside mirror and right outside mirror to the desired position via the outside mirror adjustment switch.

There are two possibilities for manual storage.
^ Press and hold memory switch and momentarily press desired memory location switch 1, 2, 3 simultaneously.
^ Actuate memory location switch for min. 0.1 s and press desired memory position button in memory location switch 1, 2, 3 within 3 s.

Automatically storing position:
^ The last position of the driver's seat, steering column and outside mirror is stored automatically in relation to the key when switching from c. 15 to c. 15R.

The position of the left outside mirror is stored in the left front door control unit and the position of the right outside mirror in the right front door control unit.

Master of the function is the driver-side front seat adjustment control unit with memory. Here also the positions of the steering column and the driver's seat are stored and called.