GF88.79-P-2006TX Passenger-Side Outside Mirror Park Position, Function

GF88.79-P-2006TX Passenger-side Outside Mirror Park Position, Function
- with CODE (275) Memory package (driver seat, steering column, mirrors)

Component Identification:

Function requirements
^ Circuit 15 ON
^ No overvoltage or undervoltage
^ Reverse gear engaged for longer than 0.6 s
^ Left/right outside mirror adjustment switch in passenger-side mirror position
^ Position measurement supplies valid readings
^ No manual mirror lens adjustment actuated or memory request active.
^ Function activated via diagnosis
^ Function in instrument cluster activated

Function
If the right front door control unit receives the message "Reverse gear engaged" via CAN-B bus by the central gateway control unit, the right outside mirror is moved to park position stored for the transmitter key (A8/1).

Abort of the function
The right outside mirror is automatically returned to the original position, when:
^ the reverse gear signal is not recognized after 10 s or
^ the vehicle speed is greater than 10 km/h or
^ the left/right outside mirror adjustment switch is switched to driver's mirror position

It is also then returned to the original position if the right outside mirror is adjusted manually in the park position via the outside mirror adjustment switch.If the right outside mirror is located in the park position with c. 15 OFF, it is returned after 10 s when c. 15 is switched back on and the transmission no longer shifted to reverse.If reverse is recognized with c. 15 ON, the mirror moves to the park position associated with the transmitter key after 0.6 s.

Store park position

Function requirements
^ C. 15 ON or c. 15R ON
^ Valid memory block number recognized

First it is necessary to adjust the desired park position for the right outside mirror manually with the rocker switch on the outside mirror adjustment up/down, in/out on the outside mirror adjustment switch.
The park position is stored by the left front seat adjustment switch group.

When the memory switch is pressed momentarily and then the left or right outside mirror adjustment switch in the passenger-side position is actuated within 3s, the momentary outside mirror position is stored as park position.
The storage request is transmitted to the left front door control unit by the left front seat adjustment switch group and from there it is relayed to the right front door control unit via the CAN-B bus.The position and storage data is stored in the right front door control unit.