Memory Systems - Easy Entry/Exit Feature Inoperative
Date: October 16, 2006Order No.: P-B-91.10/125
Supersedes:
Group: 91
SUBJECT:
Model 171.454/456/473, with Code 275
Model 203.040/054/056/061/064/065/076/087/092/261/264/281/284/740/747/764, with Code 275
Model 209.356/365/375/376/456/465/475/476
Model 211.026/056/065/070/076/083/087/256/265/276/282/283/287
Model 219.375/376
Model 230.474/475/476/479
Easy Entry/Exit Feature for Seat Position Not Functioning
If you receive customer reports in the above model vehicles regarding the easy entry/exit feature for the seat position not functioning, this may be due to prior replacement of the instrument cluster (A1) on vehicles up to Model Year 2004. This can be corrected by installing one of the following seat ECU (N32/1 or N32/2) part numbers and programming the ECU with SDS release 09/06 or newer.
NOTE:
On the above listed vehicles as of model year 2005, this feature has been discontinued in production and can not be retrofitted.
Models 171 and 219
Control units with the part numbers shown should only be programmed and coded with SDS release 09/2006 or later.
Model 203 without Central Gateway (CGW or N93)
Control units with the following part numbers are to be replaced with A211 870 46 26 and then programmed and coded with SDS release 09/2006 or later. Control units with part number A211 870 46 26 should only be programmed and coded with SDS release 09/2006 or later.
Model 203 with Central Gateway (CGW or N93) and Model 211
Control units with the following part numbers are to be replaced with A211 870 46 26 and then programmed and coded with SDS release 09/2006 or later.
Control units with the following part numbers should only be programmed and coded with SDS release 09/2006 or later.
Model 209
Control units with the following part numbers are to be replaced with A211 870 46 26 and then programmed and coded with SDS release 09/2006 or later.
Control units with the following part numbers should only be programmed and coded with SDS release 09/2006 or later.
Model 230
Control units with the following part numbers are to be replaced with either A230 820 60 26 or A230 820 61 26 and then programmed and coded with SDS release 09/2006 or later.
Parts Information