GF26.60-P-4001-03A Hydraulic Control Unit, Function

GF26.60-P-4001-03A Hydraulic control unit, function
- TRANSMISSION 716.6
- with CODE (424) Sequentronic automated manual transmission (SEQ)

Component Identification:

Operation

Pressure supply to solenoid valves
The oil (Pentosin) supplied by the hydraulic pump is delivered to the valve block (2) through a steel line. The oil passes through a pressure oil filter (2c) and via a check valve direct to the automated manual transmission clutch solenoid valve (Y90), the automated manual transmission control solenoid valve for gears 1, 3, 5 (Y92/1), the automated manual transmission control solenoid valve for gears R, 2, 4, 6 (Y92/2) and the automated manual transmission brake solenoid valve (Y91).

Clutch actuation
The automated manual transmission clutch solenoid valve (Y90) is energized by the automated manual transmission control module (N15/6). This initiates a flow of hydraulic oil, which flows through a pressure line attached to the connection (2d) and into the hydraulic central clutch operator to actuate the clutch.

Gearshift actuation
Depending on the gearshift required, the automated manual transmission control module (N15/6) actuates either the automated manual transmission control solenoid valve for gears 1, 3, 5 (Y92/1) or the automated manual transmission control solenoid valve for gears R, 2, 4, 6 (Y92/2). The solenoid valve responsible for the appropriate gear directs the hydraulic pressure into the shift cylinder, which actuates the central shift shaft and engages the required gear via the connecting elements in the transmission.