EE338

The CAN signals sent from control unit N80 (Steering column module) are incomplete.


Possible cause:

- N80 (Steering column module control unit)
Affected functions:

- CAN Communication
- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action in the event of implausible signals from control unit N80 (Steering column module)

1. Remedial action in the event of implausible signals from control unit N80 (Steering column module)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module N15/3 (ETC [EGS] control unit) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N80 (Steering column module)
Possible measures

- Read out fault memory of control unit N80 (Steering column module).
- Process displayed fault codes in control module N80 (Steering column module).
End of test