P203D

Angle variation of camshaft of right bank of cylinders relative to crankshaft

Test 1: Angle variation of camshaft to crankshaft

1. Angle variation of camshaft to crankshaft

Test 1.1: Check angular deviation of camshaft in left cylinder bank with respect to crankshaft.

1.1. Check angular deviation of camshaft in left cylinder bank with respect to crankshaft.
Figure legend

- 1Signal from component L5 (Crankshaft position sensor)
- 2Signal from component B6/2 (camshaft Hall sensor, left bank of cylinders)
- 3Signal from component B6/2 (camshaft Hall sensor, left bank of cylinders): maximum angular variation in 'retarded' direction
- 4Signal from component B6/2 (camshaft Hall sensor, left bank of cylinders): maximum angular variation in 'advanced' direction
Additional information :If an angular variation of more than 15° exists between camshaft and crankshaft, a fault code is then stored in the fault memory.Note :Communication with ECU required