AR68.20-P-2050P Remove/Install Front Floor Covering (Left)
AR68.20-P-2050P Remove/Install Front Floor Covering (Left)
Shown In Model 203.0:
1 Move left front seat all the way back
2 Unclip door sill molding (1), remove
3 Remove edge guard (2) in area of A-pillar cover (4)
4 Unclip cap from A-pillar cover (4)
5 Unscrew bolt (3)
6 Unclip cap from A-pillar cover (4), remove
7 Unclip cap from accelerator pedal (5)
8 Unscrew nut (6) and lay accelerator pedal (5) in connected condition to the side
9 Lift floor covering (7) at rear, takeout
NOTE: Installation: Insert floor covering in area of center console
10 Install in the reverse order