Manufacturer Code Charts: 2060

Wrong installation location of the PremAir sensors


Possible cause:

- B11/15 (PremAir sensor)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component B11/15 (PremAir sensor).

1. Check component B11/15 (PremAir sensor).

Test 1.1: Check attachment and installation location of sensor B11/15 (PremAir sensor).

Test 1.2: Check component B11/15 (PremAir sensor) using actual value.

Test 1.3: NoteThe PremAir sensor must be firmly latched and bonded to the PremAir radiator.

1.1. Check attachment and installation location of sensor B11/15 (PremAir sensor).
Check attachment and installation location of sensor B11/15 (PremAir sensor).
Test sequence

- Check whether the PremAir sensor is firmly latched and bonded to the PremAir radiator.
Note

- When the PremAir sensor is removed, it is irreparably damaged and must be replaced.
Question

- Is the PremAir sensor firmly latched and bonded to the radiator?







YES
The latching is OK.Possible cause and remedy

- Check component B11/15 (PremAir sensor) using actual value.
End of test

NO
The latching is not OK.Possible cause and remedy

- Latching lugs on PremAir sensor
- Latching on PremAir radiator
Note

- The PremAir sensor must be installed and bonded in the second hole after being turned 180°.
End of test

1.2. Check component B11/15 (PremAir sensor) using actual value.
Warning!Communication with ECU required.


1.3. NoteThe PremAir sensor must be firmly latched and bonded to the PremAir radiator.

1.3. No further information available.