GF82.64-P-3113-02RJ CD Player With Changer, Function

GF82.64-P-3113-02RJ CD Player With Changer, Function
- with CODE (498) Japan version


Controlling
The CD player with changer (A2/6) is actuated via the Digital Data Bus (D2B) and an electrical wake-up line, depending on the vehicle equipment. The CD player with changer (A2/6) generates messages for the following operating states:
^ No magazine in the CD player with changer (A2/6)
^ Magazine occupation
^ Number of current CD
^ Number of current title
^ List of assigned CD slots
^ Number of titles per CD
^ Current operating state (playback, pause, etc.)

The messages are read in over the D2B and interpreted by the COMAND operating, display and control unit (A40/3).

The following functions can be controlled via the COMAND operating, display and control unit (A40/3):
^ CD selection with knob or keypad entry
^ Skip track using rocker or 12-key keyboard
^ Forwards and reverse
^ Title search to next or previous title
^ "Scan" function
^ "Repeat" function for track repetition or CD repetition
^ Assignment of CD names

CD playback
The audio data is stored digitally on the CD.- In the CD player with changer (A2/6) the audio CD is driven by a motor. An optical laser system scans the unlabeled side of the rotating CD without contact and converts the digital signals into electrical signals.

The electrical signals are then decoded in the CD player with changer (A2/6) and sent over the D2B to the COMAND operating, display and control unit (A40/3) or the sound amplifier (A2/13) (model 230.467 with Code (810) Sound system), where they are amplified and then output via the vehicle speakers.

Jumps and interruptions during playback
When driving on poor roads and during hefty vibrations it may be that jumps and interruptions occur during playback. In such cases, CD operation must wait until the road conditions improve.

In wet conditions or where ambient temperatures fluctuate wildly, the CD player with changer housing (A2/6) may experience a build up of moisture (condensation formation). This can also lead to playback malfunctions. In such cases ensure that the CD player with changer (A2/6) and rear compartment are sufficiently ventilated.