GF80.50-P-0001CW Anti-Theft Alarm System (ATA (EDW)), Function

GF80.50-P-0001CW Anti-Theft Alarm System (ATA [EDW]), Function
- with CODE (551) Anti-theft alarm system (ATA [EDW])


General information
The anti-theft alarm system (ATA) monitors all inputs relevant for it after locking the vehicle with the central locking (CL) function.If a change of status is detected at one of the monitored inputs, an acoustic and visual alarm is given.
The acoustic alarm signals are output by the alarm siren (H3/1). The visual alarm signals are output by the exterior lights.In addition, the interior lights are switched on.

The rear SAM control unit with rear fuse and relay module (N10/2) has the master function for the ATA.

The ATA, when armed, monitors:
^ Doors
^ Trunk lid
^ Engine hood
^ Alarm siren
^ Vehicle changes position (anti-towing protection) (not United States Of America, Canada and Japan ) and
^ Motion in interior compartment (interior protection) (with code (882) Interior monitoring (only with ATA))

The ATA allows the following partial functions:
^ Activation of anti-theft alarm system
^ Anti-theft alarm system alarm actuation
^ Alarm actuation by panic switch (with code (763) Radio remove control with panic switch)