E1936

No CAN message was received from control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).


Possible cause:

- Check the CAN communication with control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
- Drive train CAN bus
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).

Test 2: Drive train CAN test

1. Check the CAN communication with control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
Warning!Communication with ECU required.


2. Drive train CAN test
Warning!Communication with ECU required.