EU016868

Communication with the electronic ignition lock has a malfunction. There is incomplete information.


Possible cause:

- N73 (EIS [EZS] control unit)
Affected functions:

- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N73 (EIS [EZS] control unit).

Test 2: Fault in CAN communication with control unit N73 (EIS [EZS] control unit).

1. Check the CAN communication with control unit N73 (EIS [EZS] control unit).
Warning!Communication with ECU required.


2. Fault in CAN communication with control unit N73 (EIS [EZS] control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N73 (EIS [EZS] control unit)
Possible measures

- Read out fault memory of control unit N73 (EIS [EZS] control unit).
- Process displayed fault codes in control module N73 (EIS [EZS] control unit).
End of test