E1924

One or more signals sent from control unit N47-5 (ESP control unit) via the CAN bus is implausible.


Possible cause:

- N47-5 (ESP control unit)
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N47-5 (ESP control unit).

Test 2: Chassis CAN test

Test 3: Fault in CAN communication with control unit N47-5 (ESP control unit).

1. Check the CAN communication with control unit N47-5 (ESP control unit).
Warning!Communication with ECU required.


2. Chassis CAN test
Warning!Communication with ECU required.

3. Fault in CAN communication with control unit N47-5 (ESP control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N47-5 (ESP control unit)
Possible measures

- Read out fault memory of control unit N47-5 (ESP control unit).
- Process displayed fault codes in control module N47-5 (ESP control unit).
End of test