EU010031

Communication with the engine control unit has a malfunction. The signal is not present.


Possible cause:

- Check the CAN communication with control unit Motor electronics.
- Drive train CAN bus
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N3/10 (ME-SFI [ME] control unit).

Test 2: Drive train CAN test

1. Check the CAN communication with control unit N3/10 (ME-SFI [ME] control unit).
Warning!Communication with ECU required.


2. Drive train CAN test
Warning!Communication with ECU required.