EU010141

Communication with control unit 'Transmission' has a malfunction. There is a general checksum error.


Possible cause:

- Transmission
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Fault in CAN communication with control unit Transmission.

1. Fault in CAN communication with control unit Transmission.
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Possible measures

- Read out fault memory of control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
- Process displayed fault codes in control module Y3/8n4 (Fully integrated transmission control (VGS) control unit).
End of test