EU015568

Communication with the instrument cluster has a malfunction. There is incomplete information.

Test 1: Fault in CAN communication with control unit A1 (Instrument cluster).

Test 2: Possible cause:

- A1 (Instrument cluster)
Affected functions:

- CAN Communication
- Drive position selection

Test 3: Check the CAN communication with control unit A1 (Instrument cluster).

1. Fault in CAN communication with control unit A1 (Instrument cluster).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component A1 (Instrument cluster)
Possible measures

- Read out fault memory of control unit A1 (Instrument cluster).
- Process displayed fault codes in control module A1 (Instrument cluster).
End of test

2. No further information available.


3. Check the CAN communication with control unit A1 (Instrument cluster).
Warning!Communication with ECU required.