E1923

No CAN message was received from control unit N47-5 (ESP control unit). If no customer complaint exists, the fault can be erased.


Possible cause:

- Check the CAN communication with control unit N47-5 (ESP control unit).
- Vehicle dynamics CAN bus
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N47-5 (ESP control unit).

Test 2: Vehicle dynamics CAN test

Test 3: Chassis CAN test

1. Check the CAN communication with control unit N47-5 (ESP control unit).
Warning!Communication with ECU required.


2. Vehicle dynamics CAN test
Warning!Communication with ECU required.

3. Chassis CAN test
Warning!Communication with ECU required.