EU01008F

Communication with the engine control unit has a malfunction. The signal or message is erratic.


Possible cause:

- Engine management
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Fault in CAN communication with control unit N3/10 (ME-SFI [ME] control unit).

1. Fault in CAN communication with control unit N3/10 (ME-SFI [ME] control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component Engine management
Possible measures

- Read out fault memory of control unit Engine management.
- Process displayed fault codes in control module Engine management.
End of test