Keyless Entry System - Inoperative

Article No.
93-22-17

10/27/93

KEYLESS ENTRY SYSTEM INOPERATIVE - VEHICLES BUILT FROM 4/13/92 TO 9/20/93

LIGHT TRUCK:
1993 VILLAGER

ISSUE:
The keyless entry system may become inoperative. This occurs because external electronic interference produced by other electrical components adversely affects the module.

ACTION:
Install a new keyless entry module which is designed for greater resistance to external electrical interference. Refer to the following procedure for service details.

CAUTION:
ELECTRONIC MODULES ARE SENSITIVE TO STATIC ELECTRICAL CHARGES. IF EXPOSED TO THESE CHARGES, DAMAGE WILL RESULT. REFER TO MODULE SERVICING PRECAUTIONS IN THE 1993 VILLAGER SERVICE MANUAL, SECTION 18-01.

NOTE:
THE KEYLESS ENTRY MODULE IS LOCATED BEHIND THE CENTER CONSOLE, BELOW AND TO THE LEFT OF THE ABS CONTROL MODULE.

1. Disconnect the negative battery cable.

2. Remove the center console inner kick panels. Refer to the 1993 Villager Service Manual, Section 01-12, for the removal procedure.





3. Remove the two (2) left keyless entry module attaching nuts, Figure 1.

4. Remove the rear keyless entry module attaching nut.





5. Disconnect the two (2) keyless entry module electrical connectors, Figure 2.

6. Remove the keyless entry module from the vehicle.

7. Install the new keyless entry module (F4XY-14B001-A). (Reverse the removal procedure).

8. Confirm system operation. If the system is inoperative, refer to the 1993 Villager Service Manual, "DIAGNOSIS AND TESTING" Section 01-14B-4. Perform appropriate pinpoint tests and repairs.

PART NUMBER PART NAME CLASS

F4XY-14B001-A Keyless Entry Module A

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION TIME
932217A Replace Keyless Entry 0.3 Hr.
Module

DEALER CODING
BASIC PART NO. CONDITION CODE
14B001 42

OASIS CODES: 112000, 205000