Power Steering Reservoir to Pump

REMOVAL
1. Place a drain pan under the power steering pump.





2. Remove the two power steering reservoir pump hose bolts. Allow the power steering oil reservoir to drain into the drain pan.
3. Loosen the power steering reservoir pump hose clamp at the power steering oil reservoir. Remove the power steering reservoir pump hose from the power steering oil reservoir.
4. Remove the power steering reservoir pump hose from the vehicle.

INSTALLATION
1. Position the power steering reservoir pump hose in the vehicle.
2. Install the power steering reservoir pump hose on the power steering oil reservoir.





3. Install the two power steering reservoir pump hose bolts. Tighten the two power steering reservoir pump hose bolts to 14-18 Nm (10-13 ft. lbs.).
4. Follow the start-up procedure. Start Up Procedure After Power Steering Pump or Gear Service