Third Row Seat Safety Belt

REMOVAL
1. Remove the quarter trim panel.
2. Remove the third row seat belt upper anchor bolt and D-ring from the rear pillar.
3. Remove the screw from the rear speaker support to the seat belt retractor.





4. Remove the two third row seat belt retractor bolts.
5. Remove the third row seat belt retractor from the vehicle.

INSTALLATION
To install, reverse the removal procedure. Tighten the two third row seat belt retractor bolts to 32-54 Nm (24-40 lb-ft). Tighten the third row seat belt upper and lower anchor bolts to 36-45 Nm (27-33 lb-ft).