75000 MI or 120000 KM
LubricateSteering and Suspension
Every 3,000 miles or 3 months, lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Ball Joint
Lubricate ball joints and steering linkage if equipped with zerk fittings.
Axle Shaft
Inspect and lubricate 4X4 front axle shaft U-joints.
Inspect
Wheel Bearing
Check wheels for end play and noise.
Vehicle
Multi-point inspection (recommended). Refer to Multi-point inspection procedure.
Universal Joint, Drive/Propeller Shaft
Inspect and lubricate U-joints as required, if using Special Operating Conditions T & O.
Fluid - A/T
Inspect automatic transmission fluid level, if equipped with a dipstick.
Exhaust System
Inspect exhaust system and heat shields.
Cooling System
Inspect engine cooling system and hoses.
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system if not using Special Operating Conditions schedule. Inspect brake system. Inspect the brake system if using Special Operating Conditions I.
Replace
Oil Filter, Engine
Replace oil filter if using Special Operating Conditions O only. Replace oil filter if using Special Operating Conditions T, I, or D only. Replace oil if using Special Operating Condition O.
Fuel Filter
Replace fuel filter if using Special Operating Conditions I, or D only.
Engine Oil
Replace oil if using Special Operating Condition O. Replace oil if using Special Operating Conditions O only. Replace oil if using Special Operating Conditions T, I, or D only.
Cabin Air Filter / Purifier
Replace Cabin Air Filter as required if using Special Operating Conditions I, D or O only, if applicable. Replace cabin air filter as required. If using Special Operating Conditions I, D & O, if applicable.
Rotate
Tires
Inspect tires for wear and rotate. If using Special Operating Conditions T, I, D & O.