Audio Control Module (ACM)

Audio Control Module (ACM)






Removal and Installation

NOTE: When installing a new navigation audio control module (ACM), remove the navigation DVD before sending the ACM to an authorized audio system repair facility.

NOTE: It is not necessary to remove the ACM to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval

1. NOTE: Module configuration is only required if a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to to carry out programmable module installation (PMI).

2. Remove the instrument panel center finish panel. For additional information, refer to Service and Repair

3. Remove the 4 screws and the ACM.
- Disconnect the ACM electrical connectors and the antenna lead-in cable(s).

4. To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to to carry out PMI.