Cylinder Block Assembly: Specifications
| Main Bearing Cap Bolts | 70-90 Newton Meter (Nm) |
| Connecting Rod Cap Nuts | 28-35 Newton Meter (Nm) |
| Crankshaft Seal Retainer Bolts | 8-12 Newton Meter (Nm) |
| Camshaft Thrust Plate Bolts | 8-12 Newton Meter (Nm) |
| Camshaft Tensioner Bolts | 8-12 Newton Meter (Nm) |
| Camshaft Sprocket Bolt | 55-75 Newton Meter (Nm) |
| Cylinder Head Bolts | - Tighten in 2 steps 70-80 Nm (51.6-59 lb ft). then 95-103 Nm (70-76 lb ft). |
| Exhaust Manifold | - Tighten in 2 steps. 7-10 Nm (5-7 lb ft), then 27-41 Nm (20-30 lb ft). |
| Intake Manifold | 20-30 Newton Meter (Nm) |
| Vacuum Fittings - Intake Manifold | 8-14 Newton Meter (Nm) |
| Support Brace - Intake Manifold | 40-55 Newton Meter (Nm) |
| Engine Coolant Temperature Sensor | 16-24 Newton Meter (Nm) |
| Distributor Holddown Bolt | 23-34 Newton Meter (Nm) |
| Dipstick Tube Bolt | 8-12 Newton Meter (Nm) |
| Water Outlet Connection Bolts | 16-24 Newton Meter (Nm) |
| Cooling Fan Switch | 11-24 Newton Meter (Nm) |
| Rocker Arm Bolts | - Tighten in 2 steps 6-10 Nm (4.5-7.5 lb ft), then 26-38 Nm (19.5-26.5 lb ft). |
| Rocker Arm Cover Bolts | 10-13.5 Newton Meter (Nm) |
| Front Cover Bolts | 8-12 Newton Meter (Nm) |
| Oil Pump Bolts | 20-30 Newton Meter (Nm) |
| Oil Filter | - Advance a half turn after gasket contacts the surface. |
| Oil Sender | 11-24 Newton Meter (Nm) |
| Oil Pan Bolts | 20-30 Newton Meter (Nm) |
| Water Pump Bolts | 20-30 Newton Meter (Nm) |
| Accelerator Shaft Bracket Bolt | 10-15 Newton Meter (Nm) |
| Air Pump Bracket Bolt | 20-30 Newton Meter (Nm) |
| Fuel Tube Bracket Bolt | 20-30 Newton Meter (Nm) |
| Check Valve Connector (Differential Valve) | 34-47 Newton Meter (Nm) |
| EGR Tube Connector | 34-47 Newton Meter (Nm) |
| Crankshaft Pulley Bolt | 190-230 Newton Meter (Nm) |
| EGR Valve Bolts | 18-26 Newton Meter (Nm) |
| EGR Tube Nuts | 34-47 Newton Meter (Nm) |
| Distributor Cap Screws | 2.0-2.6 Newton Meter (Nm) |
| Spark Plugs | 7-14 Newton Meter (Nm) |
| Flywheel Bolts | 73-87 Newton Meter (Nm) |
| RH No.34 Intermediate Bracket Bolt | 75-100 Newton Meter (Nm) |
| RH No. 3A Insulator Nuts | 100-135 Newton Meter (Nm) |
| LH Front No.1 Insulator to Transaxle Bolts | 35-50 Newton Meter (Nm) |
| LH Front No. 1 Insulator to Bracket Nut | 100-135 Newton Meter (Nm) |
| LH Rear No.4 Insulator to Body Bolts | 100-135 Newton Meter (Nm) |
| LH Rear No.4 Insulator to Transaxle | 50-68 Newton Meter (Nm) |
| Shift Stabilizer Bar to Transaxle | 31-47 Newton Meter (Nm) |
| Shift Mechanism to Shift Shaft | 9-13 Newton Meter (Nm) |
| Oil Pan Drain Plug | 20-34 Newton Meter (Nm) |
| Oil Pan to Transaxle Bolts | 40-50 Newton Meter (Nm) |
| Water Pump Inlet Tube to Oil Pan | 8-11 Newton Meter (Nm) |