Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1988 >> Tracer L4-1589cc 1.6L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Tools and Equipment
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Computers and Control Systems: Tools and Equipment


The test equipment required to conduct Quick and Pinpoint test are as follows:
1. Rotunda self-test automatic readout (STAR tester) No. 007-00028 with cable assembly No. 007-00036.
2. Analog volt/ohmmeter 0---20 volts DC capability (this tool is an alternative to the STAR tester).
3. Jumper wire.
4. Vacuum gauge (Rotunda 059-00008 or equivalent). If an equivalent vacuum gauge is used, the gauge range should be 0---30 inches Hg (resolution 1 inch Hg).
5. Tachometer (Rotunda No. 059-00010 or equivalent. Range 0---6000 RPM.
6. Breakout box (Rotunda No. 014-00322, special service tool T83L-50-EEC-IV or equivalent).
7. Vacuum pump (Rotunda No. 021-00014 or equivalent). Range 0---30 inches Hg.
8. Digital volt/ohmmeter (Rotunda No. 014-00407 or equivalent). Input impedance 10 mega-ohm minimum.
9. Electronic fuel injection pressure gauge EFI/CFI only (Rotunda No. 014-00447 or equivalent).
10. Spark test No. D81P-6666-A or equivalent.
11. Timing light and a non-powered test lamp.




pro multis · About Operation CHARM